Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
SPGPIN-ISO8752-ST-3X22
Register now and access more than 125,000 products
- Fastening elements, similar use to grooved pins.
- For use as a screw and bolt sleeve for high shear loads.
- Relieves load on bolts and screws, allowing smaller sizes to be used.
- An oversize of 0.2 to 0.5 mm relative to the nominal diameter ensures a secure, tight fit.
- Tapered end makes it easier to drive into the hole.
- The pins can be driven out again without damage.
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 3 mm |
Length (l1) | 22 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752 |
Last viewed
nanoProtect EU+ HSCo 90° T=4 hexagon countersink for drill/drivers and tangential impact drivers
Dynamometric screwdriver 1/4 inch
Hexagonal bolt with flange in accordance with MBN standard
PVC single core H05/H07V-U, single wire
Aluminium tar spreader with socket dia. 36 mm
Hexagon nut with flange EN 1661, steel 8, zinc-plated, blue passivated (A2K)
Hexagon bolt with threading up to the head DIN 933, steel 10.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
1/2 inch socket external TX
Hexagonal bolt with shank ISO 4014, steel 8.8, plain