Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
ISO 8752 steel plain
SPGPIN-ISO8752-ST-7X70
Register now and access more than 125,000 products
- Securing elements, used in a similar way to grooved pins
- For use as sleeves for bolts/screws, predominantly in applications where significant shearing forces occur
- Strain on bolts and screws is relieved, allowing smaller sizes to be used
- 0.2–0.5 mm oversize compared with the nominal diameter guarantees a secure, firm fit
- Tapered end makes it easier to insert the part into the hole
- Pins can be removed again without causing damage
The hole diameter is the same as the nominal diameter (tolerance 12 H).
Datasheets(X)
 | |
Nominal diameter (d1) | 7 mm |
Length (l1) | 70 mm |
Material | Spring steel |
Surface | Plain |
RoHS-compliant | Yes |
Design | Heavy-duty design |
Standards | ISO 8752, DIN 1481 |
Last viewed
Blind bucket rivet, 120° countersunk head
Expander tool for drop-in anchors, without visual installation control
Multi-point housing For flat plug-in sleeve 6.3 x 0.8 mm
3/4-inch impact socket wrench insert hexagon, metric, short
Replacement nozzle set For AP HVLP all-round paint spray gun
Door bolt with rocker arm, type 17
Pass-through ratchet POWERDRIV, metric, hexagon
Drilling jig For 3D hinges with 2 bolts, 20 mm
Series 2000 comfort connection with push-in tip Rotatable with male thread
Joint For Top Gun paint guns and cleaning gun