Drilling screw, countersunk milling head with H recessed head
pias steel zinc plated countersunk milling head H
SCR-DBIT-CS-CUTHD-H2-(A3K)-3,9X16
Register now and access more than 125,000 products
Drilling, thread forming, screwing in - all in one step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
Datasheets(X)
CAD data (available after login)
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 16 mm |
Head diameter (dk) | 7.5 mm |
Head height (k1) | 2.2 mm |
Internal drive | H2 |
Drill tip length (lp) | 3.5 mm |
Head type | Countersunk milling head |
Thread type | Self-tapping screw thread |
RoHS-compliant | Yes |
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Button-head rivet
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Wood rasp half round, DIN 7263, type C
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Twist drill bit HSCo DIN 338 type RN oxide
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Lock washer with right-angle cross-section, shape B DIN 127, steel, plain
Hexagonal bolt with shank DIN 601, steel 4.6, zinc-plated, blue passivated (A2K), with nut