ECOFAST® chipboard screw
ECOFAST steel zinc plated PT cs milling head Z
SCR-CS-CTRHD-WO-Z2-(A2K)-3,5X20/12
ECOFAST
Register now and access more than 125,000 products
Milling head
- Automatic countersinking in all coated and uncoated particle board sheets, medium-density fibreboard sheets (MDF) and all other wood and wooden materials
- Won't crack coating
- No cracking or splitting of material when screwing at edges
Thin shaft
The thin shaft enables a direct connection without gaps.
Thread and 25° tip
- Simple screwing in owing to sharp thread with anti-friction coating
- Pin-point placement on hard surfaces such as coated and waterproof chipboard and all wood types, wooden materials and medium-density fibreboard (MDF).
Not for outdoor use.
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d) | 3.5 mm |
Length (l) | 20 mm |
Thread length (lg) | 12 mm |
Head type | Countersunk milling head |
Head diameter (dh) | 7 mm |
Internal drive | Z2 |
Material | Steel |
Surface | Zinc plated |
Last viewed
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Closing loop
Twist drill bit HSS DIN 338 type RN 130°
Double-ended socket wrench
Flat washer For hexagon head bolts and nuts
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Fixing clamp set