EPDM sealing tape, full-surface self-adhesive for outdoor use
SEALTPE-RAL-OUTS-EPDM-FSA-0,6X250MMX20M
Art.-no. 0875350256
EAN 4058794310405
Register now and access more than 125,000 products
Full-surface, very strong self-adhesive
- Simple, time-saving application.
- Very secure adhesion on many typical construction surfaces.
- No curing time.
- Easy application thanks to the two-part backing paper on widths of 150 mm and above.
Watertight and breathable
- Provides a reliable seal against water from outdoors.
- Water vapour permeable membrane allows water vapour to permeate from inside to outside, thereby preventing moisture-related structural damage.
- Excellent resistance to weathering for a permanent, reliable seal.
Extremely high elasticity
- Optimum safety in case of component movements.
- Convenient to apply due to highly flexible tape.
- We recommend EPDM sealing tape adhesive to level out uneven surfaces, for applying to the film edge to prevent backwater penetration behind it, in corners or at butt joints.
- Secure the tape to the element using an additional mechanical fixing such as a window ledge. Clamp it within the element, in the clamping batten, socket rail etc.
- Not suitable for sealing against pressurised water.
- Tape cannot be plastered over.
Datasheets(X)
Permanent, reliable sealing of joints outdoors, e.g. for window sills, conservatories and façades as well as in timber construction and pre-fabricated building construction. Sealing of blind joints.
Preparation
- Substrates must be load-bearing, dry and free of ice, dust and grease.
- Absorbent and porous surfaces must be pre-treated with butyl/bitumen primer or spray primer.
Installation
- Pull off the protective film.
- Cut to length.
- Apply tape without creasing or folding.
- To ensure proper adhesion, the tape must be pressed onto the surface and smoothed with a press-on roller or a similar tool.
Colour | Black |
Backing material | EPDM |
Adhesive base | Acrylate |
Width | 250 mm |
Thickness | 0.6 mm |
Length of roll | 20 m |
Min./max. processing temperature | 5 to 30 °C |
Min./max. temperature resistance | -30 to 75 °C |
Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501 |
Ultraviolet resistance | Yes |
Elongation at break | 250 % |
Resistance against | Bitumen |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
W-SFM machine setting tool
Drawer component 10x
Faster flat-face quick-action coupling FFH BSPP SERIES - FEMALE
Slotted flat-head screw DIN 85, steel 4.8, zinc-plated, blue passivated (A2K)
Washer with large outside diameter DIN 9021, A4 stainless steel, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
Glass mirror panel for telescopic rod
Lock washer with right-angle cross-section, shape B DIN 127, A4 stainless steel, plain
pias self-drilling screw, pan head with collar and AW recess
pias self-drilling screw, pan head with collar and AW recess