Welcome to Würth Slowakia For trade customers only

FP mortar

Fire protection mortar kombi ETA
FPMORT-20LTR

Art.-no. 0893302220
EAN 4065746695046
Price for selected packaging unit
FP mortar

Art.-no. 0893302220

Price for selected packaging unit
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

A gypsum-based fire protection mortar. Supplied in powder form and contains inorganic compounds and perlite. For fire rated mortar seal of mixed penetrations.
  • Seals against fire and smoke

  • Low release of dangerous substances

  • Good adhesion to many surfaces: Concrete, masonry, brick, Leca, gypsum plasterboard, etc.

  • 1% expansion during curing

  • Mechanical resistance without reinforcement

  • Spacings from 0 mm

  • Fire resistance up to EI 240
Notice

When used for fire-rated partitions, ETA 21/0081 and the Würth assembly instructions must be observed.

Product information

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For fire rated mixed penetration seals of cables, cable bundles and cable trays, combustible and non-combustible pipes in flexible partition walls, massive walls and massive floors.

Instructions

Detailed information on the occupancy and partitions can be found in ETA 21/0081 and Würth assembly instructions.


1. The surfaces must be free of grease and dust. Completely moisten the surface and layers beforehand.


2. Corrosion-prone metal pipes must be pre-treated with a primer.


3. If necessary, build a formwork from the mineral wool panel and close smaller residual gaps with ACR 240 acrylic.


4. First add pure water, then pour mortar into the mixing tank. Mix thoroughly. Apply approximately 2 l of mortar to the 1 l of water. When stirring, always add water first, then mortar.


5. Fill the mortar into the hole to the required depth Fill all gaps.

Weight of content

15 kg

Container

Sack

Fire resistance rating

EI240

Colour

White

Mixing ratio

2:1

Max. processing time

15 min

Shelf life from production

18 Month

Min. processing temperature

5 °C

Conditions to maintain shelf life from production

dry storage area, 5°C to 30°C

Viscosity/consistency

Powder

Min. compressive strength

2.5 N/mm²

Chemical basis

Calcium sulphate

Max. compressive strength

4.85 N/mm²

Smell/fragrance

Odourless

Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
FP wrap

STRP-INTUM-50MM-25M

A graphite-based, intumescent wrap for fire rated sealing of metal and plastic pipes.
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information