Impact tool Pin punches with pilots in accordance with DIN 6450
Pin punch, locking pins
PINPNCH-TAP
Register now and access more than 125,000 products
Chromium-vanadium air hardening steel
Tempered safety hammer heads
Prevents hammer head from developing bulges or splintering
Fully hardened shaft
Particularly tough and wear-resistant as a result
Pilots on shaft of pin punch
Used to perfectly centre tool on clamping sleeves.
Datasheets(X)
 | |
Length (l1) | 180 mm |
Blade length (L2) | 95 mm |
Width of tip (d) | 6 mm |
Striking-surface diameter (a) | 10 mm |
Length of tenon | 5 mm |
Diameter of tenon | 3 mm |
Last viewed
Carpenter's pencil
Foam roller WB ECONOMY For water-based paints
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Double-sided protective tape Duoband
TX insert bit
Metal chop saw MKS 2400
Hydraulic crimping tool, WHK 60/22 For half-shell crimping inserts, width 22 mm
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
1/4 inch socket wrench insert, metric short
Body Sealing Plugs