Knife blade, straight, long, with stop roller
Cutting knife straight long with stop roller
CUTKNFE-WNDWREP-SR-ROLL-L58MM
Register now and access more than 125,000 products
Conversion of Fein item numbers to Würth item numbers.
The three digits after 639 03 ... in original Fein numbers are crucial, or the three-digit number punched into the knives.
If the number begins with 0, e.g. 095, the 0 is replaced with a 5 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 595.
If the number begins with 1 or 2, e.g. 126, a 5 is inserted before the 1 or 2 and the result is given the prefix 0696. In this instance, for example, the Würth item no. would be 0696 512 6.
Datasheets(X)
Cutting edge length | 58 mm |
Last viewed
Hexagon nut DIN 934, A4 stainless steel, plain
Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
C 6.3 TX bit (1/4 inch)
Conical washer
OrgaAer wide drawer Unit width: 600 mm
Construction shelf support
System bolt For system connector SV 30
Fastener
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)