LIGHT hazard warning adhesive tape
HAZDWARNADHTPE-LIGHT-RED/WHITE-75MMX33M
Art.-no. 081244 663
EAN 4056807860954
Register now and access more than 125,000 products
Versatile application
- Thanks to its high-visibility warning hatching, LIGHT hazard warning adhesive tape provides a strong warning effect and is ideal for temporary route marking, hazard warning and the identification of potential hazard zones.
- Can be walked on.
- Meets the requirements of ASR A1.3, DIN 4844 or DIN EN ISO 7010.
Soft, matte PVC tape with pressure-sensitive rubber adhesive
- Outstanding resistance to abrasion, corrosion and moisture.
- Good abrasion resistance.
- Excellent moulding to different shapes.
Broad substrate compatibility
- Suitable for smooth concrete screed, EP/PU/MMA coatings and tiles.
- For smooth indoor surfaces.
Easy to use
- Self-adhesive with very good adhesion to smooth surfaces.
- Quick to apply, easy to clean and can be walked on immediately.
- Simple and time-saving to apply.
- Can be torn off by hand.
- Yellow-black tape for permanent hazard points and obstacles.
- Red and white tape for temporarily restricted or movable hazard points and obstacles.
- Pivoting and turning on the tape by industrial trucks or other heavy vehicles should be avoided. This can damage the tape.
Datasheets(X)
The LIGHT hazard warning adhesive tape is made from soft PVC and is ideal for edges, work areas, passenger car lifts, steps, bundles and markings that change frequently.
It is suitable for indoor use, e.g. in production facilities, manufacturing halls, warehouse halls, sales centres, workshops, sales rooms, sports halls, trade fair halls and all public buildings.
The tape is very simple to apply to smooth concrete screed, EP/PU/MMA coatings or tiles and can be walked on immediately after bonding. It is suitable for temporary or frequently changing markings but not intended for continuous vehicle traffic.
The yellow and black tape is very noticeable, even from a distance. The colour combination supports standards-compliant hazard warning and improves navigation.
The red and white signal colours clearly indicate restricted or dangerous areas, even from a distance.
For optimal adhesion, the surface must be clean, dry and free from release agents such as grease, oil, surfactants, dirt and dust. The use of butyl primer is also recommended on certain surfaces - particularly concrete and asphalt, untreated and uncoated wood and all rough and grained surfaces.
The hazard warning adhesive tape must be pressed into place following installation to improve adhesion and durability. A press-on roller is particularly suitable for this purpose.
Colour | Red-white |
Material | PVC - Polyvinyl chloride |
Adhesive base | Natural rubber |
Length | 33 m |
Width | 75 mm |
Thickness | 170 µm |
Min./max. processing temperature | 12 to 40 °C |
Min./max. temperature conditions | -20 to 120 °C |
Elongation at break | 150 % |
Shelf life from production/conditions | 24 Month / cool and dry storage area, no exposure to sunlight, 15°C to 25°C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Hexagonal bolt with shank ISO 4014, steel 8.8, plain
Varifix mounting rail foot
WÜRTH MODYF CETUS low-cut safety shoe S3L
Ribbed nuts zinc-nickel, transparent passivated with sealing for frame screws
Reserve taper grooved dowel pin ISO 8741 steel plain
Hexagon nut DIN EN 14399-4, steel 10Z, hot-dip galvanised, for high-strength structural bolting assemblies
Hexagon nut with clamping piece (non-metal insert) ISO 7040, steel 10, zinc-plated, blue passivated (A2K)
Plug-on wash brush for surface cleaning
Bit holder E 6.3 (1/4 inch) with stainless steel sleeve and snap ring
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)