Low-profile socket head screws with hexalobular drive ISO 14580, yellow chromate zinc plated 8.8 steel (A2C)
ISO 14580 steel 8.8, yellow zinc plated
SCR-CYL-ISO14580-8.8-TX10-(A2C)-M3X6
Register now and access more than 125,000 products
Increased assembly productivity
On hexalobular (TX) fasteners, the clamping force is transmitted over a large area through the sides of the bit and not concentrated at a single point, as is the case with hexagon socket screws, for example. This has several advantages:
- Reduced bit wear
- Non-slip tool as the force is optimally distributed
- No damage to surface coating
- No wobbling
- Screw settles securely
Hexalobular bits are compliant with DIN EN ISO 10664
- Connecting elements with a hexalobular head are therefore standardised and can be used anywhere in the world
Datasheets(X)
Last viewed
Rivet nut, multi-purpose, with flat head
W-MH/S metal hollow wall anchor with hexagon head
Hexagon bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Shim ring DIN 988, steel, plain
Tungsten carbide bur with STEEL teeth
WÜPLAST® pan head screw with flange and hexagon socket WN 1451, steel 10.9, zinc-nickel-plated, black passivated (P3R)
Hexagon nut with clamping piece (all-metal) similar to DIN 980, steel 8, copper-plated
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Hexagon nut, high profile with clamping piece (non-metal insert) DIN 982, steel 8, zinc-plated, blue passivated (A2K)
Hammer drill bit Max Quadro-S