MG-ZD 10 designer folding handle Made from die-cast zinc
Furniture handle design flap handle MG-ZD 10
HNDL-FOLDHANDLE-MG-ZD-10-SILVER-160X20MM
Register now and access more than 125,000 products
Datasheets(X)
 | |
Material of handle bar | Die-cast zinc |
Surface of the handle bar | Zinc plated |
Gloss level of the handle bar | Matt |
Colour of handle bar | Silver coloured |
Material of base | Die-cast zinc |
Surface of the base | Zinc plated |
Gloss level of base | Matt |
Colour of handle base | Silver coloured |
Length (L) | 160 mm |
Width (B) | 25 mm |
Height (H) | 13.5 mm |
Dimension between axes (A) | 96 mm |
Length of the handle bar | 151 mm |
Width of the handle bar | 18 mm |
Length of the handle base | 157 mm |
Width of the handle base | 21.5 mm |
Height of the handle base | 12 mm |
Thread type | Metric thread |
Thread diameter | 4 mm |
Thread length (metric thread) | 6 mm |
Last viewed
Screw-on magnet snap catch With moveable counterplate
Pipe cable lug with inspection hole
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Shim ring DIN 988, steel, plain
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Wood screw, DIN 95 brass Raised countersunk head, slotted
Aligning clamp for door jambs
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, zinc-plated blue passivated (A2K)
Metric double open-end wrench DIN 3110/ISO 1085
Double-sided tooth plate connector type C10