Metal roofing anchoring point Anchor point Lock V standing seam
LOCK SEAM V (PF-5-ST) STANDINGSEAM
Art.-no. 0838904113
EAN 4260336780045
Register now and access more than 125,000 products
Secure all round on standing seam roofing with freely turning anchoring device. The Anchor point ABS-Lock V offers you one anchoring point for 3 people on metal seam roofing. It is clamped firmly to the standing seam roofing on a single seam and ensures particular operating comfort: Its stainless steel eyelet can be freely rotated by 360°. The anchoring device is suitable for standing seam roofing from various manufacturers, e.g. Rheinzink or similar systems.
ST = for aluminium, titanium zinc and steel
CU = for copper standing seams
Datasheets(X)
This anchor point protects roof workers on the edges or in areas where there is a risk of falling through (such as on domed roof lights). The special clamping assembly provides secure holding and protects the roof panels: You do not need to open or drill through the roof.
You can install the ABS-Lock V anchor point on standing seam roofing made from sheet steel from a substrate thickness of 0.5 mm. Stainless steel, copper and titanium zinc substrates require a minimum thickness of 0.6 mm, aluminium roofs are suitable from 0.7 mm.
Material | Stainless steel |
Rod length | 0 mm |
EN standard | 795 |
Suitable for use in the following materials | Standing seam |
Type description | PF-5-ST |
Height | 0 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Hexagon bolt with shank ISO 4014, steel 10.9, plain
Heat-shrink solder connector with colour indicator HIGH-END butt connector
Lightweight concrete milling cutter
Lightweight concrete milling cutter
WÜRTH MODYF Stretch X winter jacket
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, ≤ M24 A2-70 stainless steel, ≥ M24 A2-50 stainless steel
1/2 inch socket wrench, inch, hex., long with ball-securing groove
Hexagon bolt with shank ISO 4014, yellow chromate zinc plated 10.9 steel
Slotted flat-head screws with small head DIN 920, steel 5.8, plain
Carbide burr assortment multi-performance TiAlSiN 5 pieces