PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside
Insulation pipe clamp PUR 250 type 175
INSUPIPCLMP-PUR250-TYPE175-40X108MM
Register now and access more than 125,000 products
Internal rubber cladding
No application of sealant necessary
Datasheets(X)
CAD data (available after login)
For thermally decoupled fastening of pipes for refrigerating and air conditioning applications
 | |
Material of insulation | Polyurethane |
Volumetric weight | 250 kg/m³ |
Min. compressive strength | 3.96 N/mm² |
Material of clamp | Steel |
Surface of the clamp | Zinc plated |
Min./max. temperature conditions | -160 to 130 °C |
Heat conductance λ | 0.043 W/(m*K) |
Heat conductance λ conditions | at 0°C, according to test report F.2-1088a/04 |
Building material class | B2 - Normally inflammable |
Building material class conditions | in accordance with DIN 4102, according to test report H-066/17 |
Min. water-vapour diffusion resistance factor value µ | 1000 |
Conditions for water-vapour diffusion resistance | according to test report R-62a/05 |
Diameter (ØD) | 108 mm |
Insulating-material thickness (DS) | 40 mm |
Insulation width (BD) | 60 mm |
Connection thread (G) | M10 |
Suitable for steel pipe (outer diameter) (D) | 108 mm |
Internal drive | HS6 |
Suitable for copper pipe (outer diameter) | 108 mm |
Suitable for copper pipe (DN nominal width) | DN.. 100.. |
Free of halogenated blowing agents (< 0.1 %) | Yes |
Free of hexabromocyclododecane (< 0.1 %) | Yes |
SVHC according to REACH < 0.1 % | Yes |
Free of chlorinated paraffins (< 0.1 %) | Yes |
Free of boron tris-(2-carboxyethyl)-phosphine (< 0.1 %) | Yes |
Free of polybrominated diphenyl ethers (< 0.1 %) | Yes |
Free of polybrominated biphenyls (< 0.1 %) | Yes |
Free of boron compounds (< 0.1 %) | Yes |
Free of lead (< 0.1 %) | Yes |
Free of tin (< 0.1 %) | Yes |
Last viewed
Hexagon nut, low profile DIN 985, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Kinvaro T-105 flap lift fitting
K Plus insulation pipe clamp With separate insulation part
Rivet nut with flat head and partial hexagon shank
Slotted countersunk head screw DIN 963, steel 4.8, zinc-plated, blue passivated (A2K)
Vehicle dry abrasive paper strip RED PERFECT®
Cover cap For tapping screws, A2 window sill screws, pias window sill screws
7-pin socket 12 V With cut-off contact for rear fog light
W-VD-IG internally threaded sleeve, zinc-plated steel for W-VD bonded anchor capsule systems and WIT injection systems in uncracked concrete
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)