Paintwork finishing hammer
Body smoothing hammer
PANBETHAM-BDYWRK-D12MM-HANDLE200MM
Register now and access more than 125,000 products
With its specially shaped and polished striking surface, the hammer can be used to carefully straighten bulges or over-pulled dents
The striking surface is not chrome-plated to prevent chipping. Therefore, the hammer must always be lubricated after use. Tool marks can be rectified with a high-gloss polish.
Datasheets(X)
Face diameter (hammer) (Ø) | 12 mm |
Length of handle | 200 mm |
Last viewed
Cutlery insert
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
Soldering tip for electric soldering iron
Slotted raised countersunk head screw DIN 964, A2 stainless steel, plain
W-VD-A anchor rod A4 stainless steel
Fixanchor internal thread W-FAZ-IG/S - push-through installation
WÜPOFAST® zinc-plated yellow chipboard screw Steel, zinc-plated yellow, full thread, countersunk head, PZ
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
Shim ring WN 988 A2 stainless steel plain
Hexagon tapping screw DIN 7976, zinc-plated steel, blue passivated (A2K), shape C (with tip)