Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
DIN 7983 steel zinc plated H shape C with tip
SCR-RSDCS-DIN7983-C-H3-(A2K)-5,5X32
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = Thread without tip
Shape R = Thread with rounded tip
Datasheets(X)
CAD data (available after login)
 | |
Standards | DIN 7983 |
Material | Steel |
Surface | Zinc plated |
Form | C |
Head type | Raised countersunk head |
Drive type | H |
Internal drive | H3 |
Nominal diameter (d1) | 5.5 mm |
Head diameter (dk) | 10.8 mm |
Length (l1) | 32 mm |
Head height (k1) | 3.4 mm |
Head details | 0 - not applicable |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Thread form | 0 - not applicable |
RoHS-compliant | Yes |
Declaration of performance (EU-CPR) | No |
Last viewed
Thread-rolling screw
Hexagonal bolt with shank for pressure container construction ISO 4014, A2 stainless steel
Frame Nova Pro Scala H90 For H90 drawers
PUR 250 type 175 insulation pipe clamp With screws, a permanent PUR hard foam coating and rubber shell on the inside
TX double box-end wrench
GEFU® thread-rolling screw With Taptite 2000® thread, cylinder head and hexalobular drive
Solid carbide short twist drill bit DIN 6539
Slotted set screw with truncated cone DIN 551, steel 14H, zinc-plated blue passivated (A2K)
SC mini cutter, twin blade with reinforced shank
Window construction screw, raised countersunk head FBS Steel, zinc-plated, blue passivated (A3K), PH drive