Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
DIN 7981 stainless steel A2 pan head H form C
SCR-PANHD-DIN7981-C-H2-A2-3,9X6,5
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
- Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
- Shape C = thread with tip
- Shape F = thread without tip
- Shape R = thread with rounded tip
Self-tapping screws made from stainless steels are softer than those made from case-hardening steel. These screws are therefore not able to form a counter thread in steel plates. For this reason, they should only be used in soft materials, such as aluminium.
Datasheets(X)
 | |
Material | Stainless steel A2 |
Nominal diameter (d1) | 3.9 mm |
Length (l1) | 6.5 mm |
Head height (k1) | 2.8 mm |
Internal drive | H2 |
DIN | 7981 |
Head type | Pan head |
Standards | DIN 7981 |
Thread type | Self-tapping screw thread |
Shape of tip | C |
Last viewed
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Hand tap, taper tap HSS DIN 352
WÜPOFAST® steel zinc-plated blue chipboard screw With combination slot
Japanese hand saw, 1C
Vertical adapter
Double flaring tool, cars for D-E-F flanges in accordance with DIN 74234
Serrated rod
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Drilling jig For Fixograss 9000 shelf support