Pan head tapping screws with recessed head H
ISO 7049 steel zinc nickel silver H shape C
SCR-PANHD-ISO7049-C-H2-(ZNSHL)-4,2X9,5
Register now and access more than 125,000 products
Tapping screws belong to the thread-moulding screw family. When screwed into a pre-prepared core hole, these screws shape their own counter-thread.
Guideline values for selecting the correct core hole diameter are contained in DIN 7975.
Shape C = thread with tip
Shape F = thread without tip
Shape R = thread with rounded tip
Datasheets(X)
 | |
Material | Steel |
Surface | Zinc nickel silver |
Form | C |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 9.5 mm |
Head diameter (dk) | 8 mm |
Head height (k1) | 2.80 mm |
Internal drive | H2 |
DIN | 0 - not applicable |
Head type | Pan head |
Head details | 0 - not applicable |
Declaration of performance (EU-CPR) | 0 - not applicable |
Standards | ISO 7049 |
Thread type | Self-tapping screw thread |
Thread design | 0 - not applicable |
Shape of tip | C |
Last viewed
Hole saw HW
Countersunk screw with hexagon socket head
Round-headed strip nails, 21°
Steel nail with riveted washer and discontinuous longitudinal corrugation
AT 42 RD automatic door seal
Sandpaper strip Useit® Superpad vehicle
Thin-walled heat-shrink hose Shrink rate 3:1, with internal adhesive
PZ laser tip screwdriver with hexagon shank
RW® bit
Roofing screw pias® A2 stainless steel