PinPuller® power pulling electrode
Pulling electrode PinPuller Power 15 straight
PULLELTRD-F.PINPULLER-POWER-15FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
Suitable for universal use
Optimum power distribution with numerous electrodes in 2 rows at very short intervals
No bump formation, no unnecessary material weakening
In contrast to wiggle wire, pin electrodes can be welded on more than 1000 times
Effective and economical
Thanks to the insulated bearing of each electrode, only minimal welding power is required
Low heat input into sheet metal
Individual electrodes are quick to weld on and easy to remove by twisting
Saves valuable working time
Datasheets(X)
Especially for small and deep areas of damage and for levelling wheel arches
Design | Straight |
Number of rows | 2 PCS |
Number of electrodes | 15 PCS |
Product weight (per item) | 178 g |
Last viewed
Max Longlife & Speed spade chisel
Circlip pliers, shape B for shaft circlips
Aluminium telescopic shaft with water drain 1/2 inch to 3/4 inch hose connection
Big Bag, mineral wool With skirting and fastener bands
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Hinged door cabinet BASIC
Pan head tapping screw, C shape with H recessed head DIN 7983, steel, zinc-plated, blue passivated (A2K), shape C, H cross recess
Double cylinder S5 locking system
Twist drill bit HSS DIN 340 type RN 130°
Hand-held stapler HT 53 High impact strength for thin materials