PinPuller® power pulling electrode
Pulling electrode PinPuller Power 29 straight
PULLELTRD-F.PINPULLER-POWER-29FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
Suitable for universal use
Optimum power distribution with numerous electrodes in 2 rows at very short intervals
No bump formation, no unnecessary material weakening
In contrast to wiggle wire, pin electrodes can be welded on more than 1000 times
Effective and economical
Thanks to the insulated bearing of each electrode, only minimal welding power is required
Low heat input into sheet metal
Individual electrodes are quick to weld on and easy to remove by twisting
Saves valuable working time
Datasheets(X)
Particularly suitable for high tensile forces with 29 electrodes
Design | Straight |
Number of rows | 2 PCS |
Number of electrodes | 29 PCS |
Product weight (per item) | 343 g |
Last viewed
Glazing packer
Fixanchor W-FAZ/A4
Half-head strip nail, 34°, with smooth shaft Steel, zinc-plated yellow (A4C), free from chromium VI
Workbench PRO WUSK
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Twist drill bit HSCo DIN 338 type RN MFD VARIO
Cylinder head serrated screw with hexagon socket
Copper spray CU 800
Rivet nut with flat head and knurled shank
Perforated one-way runner for REDOSLIDE Z45-H sliding door fittings