PinPuller® power pulling electrodes
PinPuller Power pulling electrodes single-row
PULLELTRD-PINPULLER-POWER-10FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications:
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
The grid grooves allow secure attachment of the pulling cross piece at any desired position
Individual electrodes are quick to weld on and easy to remove by twisting
Saves working time
Multiple electrodes at intervals of only 9 mm ensure optimum force distribution
In contrast to wiggle wire, pin electrodes can be welded on more than 500 times
Each electrode has an insulated bearing and so only requires minimal welding power, reducing the heat transferred to the sheet metal
Prior to initial use, the brass coating must be removed from the tips of the electrodes.
Datasheets(X)
Length | 92 mm |
Product weight (per item) | 117.000 g |
Last viewed
Shutter hinge
Pan Head screw with hexalobular head ISO 14583, steel 4.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
System assortment 4.4.1, double open-end wrench 8 pieces
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hexagonal bolt with thread up to the head
Round head screw with square neck
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
34° half-head collated nails AN
Securing sleeve