Precision crepe tape
CRPTPE-PREC-38MMX50M
Art.-no. 0992000338
EAN 4050382115010
Register now and access more than 125,000 products
Precise and gentle on surfaces
- Very precise bonding due to the thin, supple, high-quality washi paper
- Razor-sharp and super-flat paint edges prevent paint from bleeding
- Excellent adhesion even on sensitive substrates due to the special acrylate adhesive
- Can be removed without leaving residue
For a broad range of applications
- UV-resistant for up to 4 months, making the adhesive tape suitable for indoor and outdoor applications
- Paintwork requiring oven drying does not present a problem as the tape is heat-resistant up to +100 °C
- Wait until the tape is dry before removing it
- Exercise caution with paints containing zinc or zinc oxide, as these may leave a residue
- On critical substrates such as parquet, laminate, cork, linoleum or other surfaces that will be visible later, adhesive residues or substrate tearing cannot be ruled out
- When grouting tiles with sealant, the tape must be removed before the drying process is complete as otherwise the tape will be difficult to remove
- Not suitable for use on carbon, zinc, lead (including lead-based paint), copper, anodised metals, natural stone (marble etc.) or aged or weathered PVC
1 Ordinary crepe tape: Paint running behind can result in rough paint edges
2 Precision crepe tape: Especially fine paint edges
Datasheets(X)
- For indoor and outdoor applications
- Suitable for solvent-based and water-based paint systems
- Can also be used on sensitive substrates in the construction and automotive sectors, such as on carpets, furniture and chrome strips
- For masking work during painting applications, particularly on sensitive surfaces
- Suitable for masking in glazing applications
- For securing masking paper and masking films
- For masking work during painting applications in the automotive and metal sectors, particularly for sensitive surfaces, multi-layer painting or for the automotive aftermarket
- Also suitable for oven drying
The surfaces on which the adhesive tape is applied must be dry and free of dust, oil, solvents or other chemicals.
Adhesive base | Acrylate |
Adhesive tape backing material | Japanese rice paper (Washi Tape) |
Colour | Yellow (base material) |
Width | 38 mm |
Length | 50 m |
Thickness | 85 µm |
Min./max. processing temperature | 10 to 40 °C |
Min./max. temperature resistance | 0 to 100 °C |
Short term temperature resistance max. /conditions | 100 °C / Briefly max. 30 min. |
Dynamic peel strength at 25 mm | 3.75 N |
Elongation at break/conditions | 3 % / in accordance with DIN EN 14410 |
Resistance to tearing | 34.7 N/mm |
Ultraviolet resistance | 4 months, outdoor weathering |
Moisture resistance | Yes |
Shelf life from production/conditions | Unlimited / cool, dry and frost-free storage area that is protected from UV rays |
Last viewed
Stud with threaded end ≈ 2d DIN 835, blue passivated zinc plated 8.8 steel (A2K)
ASSY 4 CS screw for furniture fittings Steel zinc plated full thread countersunk head
Single wire seal (SEAL) For uninsulated cable connector
Façade construction screw Faba type A with hexagon head and sealing washer
Ball joint pin ejector
Longlife & Speed HSSCo8 bimetal cylinder saw
Hexagon bolt with threading up to head DIN 558, steel 4.6, plain
ZD 4 door handle pair
Hexagon bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon bolt with shank ISO 4014, steel 8.8, zinc-plated, yellow chromated (A3C)