REPLAST Plastic primer
REPLAST plastic primer
REPSYS-PLA-PRIMER-200ML
REPLAST
Register now and access more than 125,000 products
The plastic primer improves the adhesion of REPLAST plastic adhesives on various plastic surfaces.
Carry out preliminary tests to ensure surface compatibility.
Datasheets(X)
The plastic primer improves the adhesion of REPLAST plastic glue to various plastic surfaces.
Shake well before use. Spray a thin layer of primer onto the prepared parts from a distance of approx. 30 cm and allow them to flash off for at least 5 minutes at 23°C before beginning gluing. Hold the aerosol can in a vertical position. For more information, please refer to the technical data sheet.
Contents | 200 ml |
Last viewed
TX bit C 6.3 (1/4 inch) with hole
Load securing box For many load-securing applications
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Finishing disc Useit® Superpad SG
24 V Standard ABS/EBS socket For brake systems
Dry abrasive paper roll wood KP perfect KP perfect
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
S50 diamond socket cutter
Workbench PRO WUS 1
pias® drilling screw, hexagon head with reduced drill tip