Raised countersunk tapping screw, C shape with H recessed head
ISO 7051 steel zinc plated H shape C
SCR-RSDCS-ISO7051-C-H1-(A2K)-2,9X13
Register now and access more than 125,000 products
- Tapping screws belong to the thread-moulding screw family. These screws form their own counter thread in a prefabricated core hole when screwed in
- Guidelines for selecting the correct core hole diameter can be found in DIN 7975
Datasheets(X)
 | |
Standards | ISO 7051 |
Material | Steel |
Surface | Zinc plated |
Head type | Raised countersunk head |
Drive type | Crosshead |
Internal drive | H1 |
Nominal diameter (d1) | 2.9 mm |
Head diameter (dk) | 6.3 mm |
Length (l1) | 13 mm |
Head height (k1) | 1.7 mm |
Thread type | Self-tapping screw thread |
Thread design | Full thread |
Pitch | 1.1 mm |
Product class | A |
RoHS-compliant | Yes |
Construction product | 0 - not applicable |
Declaration of performance (EU-CPR) | No |
Last viewed
3/8 inch internal extractor, long
Side cutters DIN ISO 5749
Shackle, straight, with hexagon socket A4 stainless steel
Half-length taper grooved pin ISO 8745 A1 stainless steel plain
Cover caps For aluminium airline lashing rails
Square wedge-shaped washer DIN 434, steel, hot-dip galvanised, wedged-shaped, for U section
Countersunk screw, type SK/A4 — push-through installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
GEFU® thread-rolling screw With Taptite 2000® thread, flat head with hexalobular drive
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hammer drill bit Plus Duo-S Vario