Rivet nut with a small countersunk head and knurled shank
Small cs hd steel zinc plated w knurled shank open
NUT-RIV-CS-(A2B)-(0,5-3,0)-16,0X9,9-M8
ZEBRA
Register now and access more than 125,000 products
- Rivet nuts can be used as riveted and screwed connections. As a result, they offer both secure connections and the ability to easily mount additional components using conventional screws
- Installation from one side, making it suitable for closed profiles too
- Simple, fast and mostly automatic installation
- No countersinking of drill holes necessary
- Consistently high installation quality
- Anti-rotation connection with load-bearing thread
- Improved efficiency thanks to faster operation, secure connections and increased quality
The specified technical values are guideline values and the information may vary for this reason depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
CAD data (available after login)
Especially well-suited for achieving high resistance to turning in soft materials, such as aluminium, wood, plastic, asbestos etc.
 | |
Material | Steel |
Surface | Zinc plated |
RoHS-compliant | Yes |
Thread type x nominal diameter (D) | M8 |
Length (l1) | 16 mm |
Head diameter (d1) | 11.0 mm |
Outer diameter (d2) | 9.9 mm |
Head height (k1) | 0.50 mm |
Min./max. grip range (s1) | 0.5-3.0 mm |
Tensile fracture load | 22000 N |
Shear-fracture load | 5200 N |
Max. tightening torque | 25 Nm |
Drill hole diameter | 10.0 mm |
Shank detail | With knurled shank |
Head type | Small countersunk head |
Last viewed
Pressure plate For shaping device
ISO 15979 Blind rivet assortment, round pan head In system case 4.4.1. Steel, zinc-plated, blue passivated
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip
Hexagonal bolt with shank
Countersunk screw, type SK/A4 — push-through installation DIN 7991 (ISO 10462) A4 stainless steel, with countersunk washer, A4 stainless steel
Flat nut with small wrench size, fine thread DIN 80705, steel, 14H, plain
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 DIN 7990, steel 5.6, hot-dip galvanised (hdg)
Mechanical manual crimping pliers WK 22 For replaceable half-shell crimping inserts, width 22 mm
Wood screw Hexagon head DIN 571, steel zinc-plated blue
Wire stripping pliers, adjustable