Rivet nut with countersunk head
Countersunk head aluminium open
NUT-RIV-CS-ALU-(1,5-4,5)-9X17-M6
Register now and access more than 125,000 products
The specified values are guideline values. For this reason, the information may vary depending on the workpiece, drilled hole tolerance and roughness of the surface.
Datasheets(X)
 | |
Material | Aluminium |
Surface | Plain |
Thread type x nominal diameter (D) | M6 |
Head diameter (d1) | 11.5 mm |
Outer diameter (d2) | 9 mm |
Length (l1) | 16 mm |
Head height (k1) | 1.5 mm |
Min./max. grip range (s1) | 1.5-4.5 mm |
RoHS-compliant | Yes |
Tensile fracture load | 6700 N |
Max. tightening torque | 6 Nm |
Head type | Countersunk head |
Last viewed
Metric combination wrench with POWERDRIV®
Extendable drawer For Flexible workshop trolleys
Rust remover Rost-Off
Washer with large outside diameter DIN 9021, polyamide
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
Gauge stand for precision dial gauge
Rack For door jamb clamps
Serrated washer, externally serrated, type A DIN 6797, zinc-plated steel, blue passivated (A2K)
1/2 inch impact socket wrench insert hexagon, metric, short
Floor protection panel