SH perforated sleeve for injection systems
Perforated sleeve SH
ANC-(SH)-PLA-TRANSP-12X80
Register now and access more than 125,000 products
Individual fixing point in masonry
- ALLROUNDER WIT-VM 250 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- WIT-NORDIC injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
- BASIC WIT-PM 200 injectable mortar, W-VI-A anchor rod, conventional threaded rod with acceptance test certificate, SH perforated sleeve
Do not use perforated sleeve SH in aerated concrete!
Datasheets(X)
CAD data (available after login)
For anchoring in solid and perforated brick masonry
Type description | SH 12 x 80 |
Diameter | 12 mm |
Length | 80 mm |
Material | Plastic |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 0) | 85 mm |
Effective anchoring depth (h ef) | 80 mm |
Suitable for anchor rod | M8 |
Required injection mortar | WIT-PM 200 |
Approval | ETA-13/0037 |
Last viewed
Drawer inserts
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Slotted screwdriver with round shank
Thread repair single set TIME-SERT® 14 pieces
Twist drill bit HSCo DIN 340 type RN OXIDE
Vacuum/pressure pump For window repair
Thread repair single set TIME-SERT® 14 pieces
VDE junction box Q12 With external fastening tabs (cross hole and slotted hole for subsequent corrections)
Micrometer With reference dimension
Drum trolley With two support wheels