Screwdriver PH long With round shank
Screwdriver PH round blade long
SCRDRIV-PH2X300
ZEBRA
Register now and access more than 125,000 products
Long precision
- For hard-to reach areas and special applications due to the extra long shank
- Robust round shank, which has been brushed chrome-plated to protect against corrosion
- Quick identification of the right size using the Würth colour code on the shank
- Black point tip for the best possible fit in the screw
- Tip finished according to the DIN 5260-PH and ISO 8764-PH standards for PH screwdrivers
- Complies with the DIN 5262 and SMS SS 2831 standards
More than just good grip
- Fatigue-free working with the 2C handle with hard core and soft, non-slip surface
- Fast-turning zone and hard material in the lower part of the handle enable quick turning using the index finger and thumb once the screw is loosened
- Quick and easy identification with the shank symbol and size printed on the handle
Datasheets(X)
Tip size | PH2 |
Blade length (A) | 300 mm |
Handle length (B) | 106 mm |
Handle width (C) | 35 mm |
Last viewed
Sandpaper, waterproof
Hammer head bolt with square neck DIN 186, A2 stainless steel, plain
Threaded pin ISO 4027, steel 45H, zinc-plated, blue passivated (A2K)
WÜPOFAST® nickel-plated chipboard screw Nickel-plated steel, full thread, raised countersunk head, PZ
Wire rope clamp DIN 741, zinc-plated steel
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Flat washer with chamfer ISO 7090, steel, 200 HV, zinc-nickel-plated silver (ZNSH)
Pine tree clip, type 4
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Diamond disc Cut & Grind BSL Metal