Separator
Separator tool
SEPRTL-SPNW115MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 22-115 mm |
Width of clamping jaw (B) | 170 mm |
Spindle length (C) | 250 mm |
Min./max. hole distance (E) | 115-208 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M14 x 1.5 |
Last viewed
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Round head screw with square neck DIN 603, steel, strength class 8.8, zinc-plated, blue passivated (A2K)
Catch support For DWD XP
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Aluminium, Ø 7 mm hexagon, with magnet
Feather key, high shape DIN 6885, steel, plain, shape B
24 V Standard ABS/EBS plug For brake systems
Industrial wet and dry vacuum cleaner ISS 30-L AUTOMATIC
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A4-80 stainless steel, plain
K insulation pipe clamp With permanently integrated damping insert