Separator
Separator tool
SEPRTL-SPNW115MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 22-115 mm |
Width of clamping jaw (B) | 170 mm |
Spindle length (C) | 250 mm |
Min./max. hole distance (E) | 115-208 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M14 x 1.5 |
Last viewed
Clamp washer
Vehicle dry sandpaper disc Arizona® Perfect
Countersunk rivet
Metric double open-end wrench DIN 3110/ISO 1085
BOLTEX rust remover
Die holder DIN EN 22568 Performance
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Hand tap, second tap HSS DIN 352
Allen key, hexagon socket with ball head Extra-long design
Hexagon nut, low profile, with clamping piece (non-metal insert) inch Similar to DIN 985, steel GR5, zinc-plated, blue passivated (A2K)