Separator
Separator tool
SEPRTL-SPNW75MM
Art.-no. 0714524075
EAN 4024835927192
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 14-75 mm |
Width of clamping jaw (B) | 115 mm |
Spindle length (C) | 170 mm |
Min./max. hole distance (E) | 76-139 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M10 |
Last viewed
Wire end ferrule with plastic sleeve
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Shim ring DIN 988, steel, plain
Mounting rail, 39 x 37
Soft wax assortment, brown 20 pieces
Carbide plastic drill bit with clamping surface and adjustment screw
Nitrile chemical protective glove with cotton velour finish inside
Hexagon bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)