Spherical washer for conical washer DIN 6319, steel with zinc-flake coating
DIN 6319 steel zinc flake, silver, type C
WSH-SPHR-DIN6319-C-(ZFSH)-D6,4
Register now and access more than 125,000 products
Due to the high degree of hardness, spherical washers according to DIN 6319 have a risk of hydrogen embrittlement when used in connection with zinc-plated surface coatings. The use of zinc-plated surface coatings is therefore not recommended. The ZFSH zinc flake system does not pose a risk of hydrogen embrittlement and offers the longest corrosion protection times compared to zinc-plating.
Datasheets(X)
 | |
Standards | DIN 6319 |
Suitable for screw thread | M6 |
Internal diameter (d1) | 6.4 mm |
Form | C |
Outer diameter (d2) | 12 mm |
Thickness (h1) | 2.3 mm |
Material | Steel |
Surface | Flake zinc silver |
RoHS-compliant | Yes |
Last viewed
Vehicle dry abrasive paper strip RED PERFECT®
CEE connector, 400 V, 6 H
Stretch X trousers
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, zinc-plated, blue passivated (A2K)
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Snap ring shape SW for shaft
Glazing packer
Hand-lever grease gun For 400 g cartridges
OrgaAer front cover for corner section