T-connector For commercial vehicles
Push-in quick-action plug conection, T-shaped
QCKPLGCON-(T-CON)-D12MM
Register now and access more than 125,000 products
Quick and easy pipe/hose installation and removal
Reduced risk of leaks
Due to fewer components
Corrosion-resistant brass design
Saves money
Thanks to reduction in installation and repair times
Complies with the international DIN, DOT and SAE regulations
Operating medium:
Compressed air
Maximum operating pressure:
Complies with DIN 74324
Operating temperature:
-40°C* to +100°C (* at temperatures below +2°C please observe the air quality)
Hoses:
Comply with DIN 74324
Material:
- Connector body: Brass
- Pipe reinforcing sleeve: Nickel-plated brass
- Multi-pronged tensioning clamp ring: Nickel-plated brass
- O-ring: Buna N (low nitrile)
Above a certain length, pipes "vibrate", irrespective of whether they are made of steel, copper or plastic. Therefore, all brake line piping (5–16 mm diameter) should be secured on the body or on the frame using pipe clamps, rubberised if possible, wherein the distance should be 1 m and must not exceed 1.20 m.
Datasheets(X)
- For polyamide pipes Ø 6 to 16 mm
- For connecting components in the pneumatic brake system on commercial vehicles and auxiliary commercial vehicle systems
Outer diameter of pipe (T) | 12 mm |
Length (L) | 64.2 mm |
Material | Brass |
Last viewed
Twist drill bit HSCo DIN 340 type RN OXIDE
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Cleaning brush with M6 WIT-RMB connecting thread
Bodywork double hook
Bonded seal
Atlantis S3 safety shoes
High-strength screw retainer
3/8" socket wrench bi-hex, multi profile
Thread repair single set TIME-SERT® 14 pieces
Collated nails and gas cartridge NG CSM-1