TIOMOS flap hinge
Tiomos flap hinge
HNGE-TIOMOS-FLAP-90DGR-MAX21MM
Register now and access more than 125,000 products
- Opening angle 90°
- For flaps up to 21 mm thick
- Narrow joint profile
- 3-dimensional adjustment
Flap and floor parts secured with chipboard screws, ∅ 3.5 x 15 mm.
Hinge dimensions and joint calculation according to factory setting.
Datasheets(X)
 | |
Door position | Overlay |
Damper | No |
Spring | No |
Type of assembly | Screw-on |
Suitable for min./max. door thickness | 14-21 mm |
Surface | Nickel plated |
Material | Die-cast zinc |
Opening angle | 90 Degree |
Last viewed
Resin remover concentrate HEK 5000
Raised cunstersunc tapping screw, C shape with AW drive
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Hexagonal bolt with shank ISO 4014, plain A2-50 and A2-70 stainless steel
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
System case empty range 4.4.1
Knob
Plug-in screw connection with male thread
Soldering gun Powerjet
Twist drill bit HSCo DIN 1869 R2 type RN