Threaded rod DIN 976
4.8U, hot-dip galvanised
DIN 976-1 steel 4.8U hot-dip zinc-plated
THRROD-DIN976-A-4.8U-(HDG)-M20X1000
Register now and access more than 125,000 products
The Würth threaded rods are produced in accordance with DIN 976-1 (Form A); quality is monitored by the Würth QS laboratory.
There is therefore no external monitoring in accordance with building standards. Threaded rods in accordance with building standards can be supplied on request.
Datasheets(X)
Once hot-dip galvanised, the threaded rods are ISO-compliant. I.e., hot-dip galvanised nuts with thread tolerance 6H will fit.
 | |
Thread type x nominal diameter (d1) | M20 |
Length (l1) | 1000 mm |
Standards | DIN 976-1 |
Material | Steel |
Property class | 4.8 |
Surface | Hot dip galvanized |
Form | Type A |
Thread type | Metric thread |
Identification colour | Blue |
RoHS-compliant | Yes |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Raised countersunk head screw with H recessed head DIN 966, A2 stainless steel, plain
Cylinder tapping screw, C shape with hexagon socket
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc-plated, blue passivated (A2K), shape C, with tip
HPC solid carbide drill Speeddrill 4.0-Universal, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Dry abrasive paper disc wood KP perfect
Lock washer with right-angle cross-section, shape B DIN 127, A4 stainless steel, plain
3/4-inch impact socket wrench insert hexagon, metric, long
Raised contersunk head tapping screw, C shape with PH recessed head DIN 7983, A4 stainless steel, plain. With cross recess.
Partition element