Union nipple
Socket union brass
SKTUN-BRS-DN20-AG-G1IN
Register now and access more than 125,000 products
- Direct connection to a female thread, eliminating double nipples
- Only one screw connection per joint, resulting in greater safety and saving of a union nut and a seal
Datasheets(X)
For the connection of two stainless steel corrugated pipes
For connection to a female thread
Mounting is the same as for a union nut, i.e. slide a union nipple over the pipe, compress the pipe, place a gasket in-between and screw in.
 | |
Material | Brass |
Connection thread | ET G 1 inch |
DN nominal width | DN 20 |
Internal diameter | 25.4 mm |
Width across flats (SW) | 36 mm |
Length | 23 mm |
Last viewed
Hexagon head sealing plug, short screw-in pin DIN 7604, steel, zinc-plated, blue passivated (A2K)
Toothed trowel steel with wooden handle
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Sealing plug GPN 300 F Polyethylene (PE-LD), natural
Drawer cabinet PRO 550
Hexagonal bolt
pias® wing-type drilling screw, countersunk head with AW drive
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Double securing shackle W-GFIXBD 927 Suitable for DIGA® CS-2 Power and DIGA® CS-3