Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 27–42 mm
UNIADAPT-F.CLSYSTEST-085350
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
W-VD-A/S anchor rod for W-VPZ and W-VD bonded anchor capsule systems and WIT injection systems in concrete, zinc-plated steel
VBL-2 connector drilling jig
Fabric sanding belt Zirconia alumina electric grinding file
FLEXEN® packing wool
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Wheelbarrow frame
Anti-hologram polish P30 Plus
pias® drilling screw, countersunk head with AW drive
Lashing eye set
Marking gun For simple and convenient marking for indoor and outdoor use