Universal adapter For cooling system tester
Univ. adap., cool. sy. test. 27–42 mm
UNIADAPT-F.CLSYSTEST-085350
Register now and access more than 125,000 products
Datasheets(X)
1. Adapter rubber and opening to be sealed must be free of oil, grease and glycol residues
2. Press the adapter into the radiator opening or expansion tank and seal by rotating the two adjustment wheels against one another
3. Connect radiator tester
4. Pump approx. 1.3 bar into the cooling system using the hand pump
5. The pressure in the cooling circuit must not drop by more than 0.2 bar within 10 minutes.
6. In the event of a drop in pressure, localise and eliminate potential points of leakage (e.g. water pump, hoses, cylinder head seal)
Caution: The universal adapter should never be immersed in cooling fluid as this causes fluid leakage at the valve when the pressure is released.
null | null |
Last viewed
Aluminium paste AL 1100
Cover cap for 3D hinges
Mitre system bolt for cam lock nut with M6 thread
redoslide M15-HE furniture sliding door fitting set With top glass retaining profile
Floor cleaning tool
VDE cable shears Standard: EN 60900. IEC 900.
Blanking grommet Made from neoprene
Brake piston resetting tool set
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
TIG equipment kit 2 For WLV17/WLT17K TIG torches, dia. 2.4 mm