Universal adhesive tape
Universal adhesive tape
ADHTPE-UNI-BLACK-19MMX50M
Register now and access more than 125,000 products
Marking on floors. Sealing ventilation ducts
Extremely strong rubber adhesive
Excellent adhesion even on uneven, rough and fibrous surfaces
Plastic coating
The tape is impermeable to water and vapour diffusion, is not sensitive to moisture and can be written on
Can be torn off by hand
Tape can be applied quickly and easily
The universal adhesive tape is not resistant to UV so should not be exposed to direct sunlight. The surfaces to be adhered must be dry and free from dust, grease and silicone. To ensure proper adhesion, the tape must be pressed on to the material being bonded with sufficient force
Datasheets(X)
Suitable as a problem-solver for wide range of applications, e.g.:
- Labelling, wrapping and securing cables
- Sealing and labelling cardboard boxes
- Masking sharp-edged objects and abutting carpet edges
- Marking floors
- Sealing joints
- Sealing ventilation ducts
- Masking drill holes, vents and openings
The tape is only suitable for short-term outdoor use
Backing material | Plastic-coated rayon fabric |
Adhesive base | Natural rubber |
Colour | Black |
Width | 19 mm |
Length | 50 m |
Thickness | 0.3 mm |
Dynamic peel strength at 25 mm | 9.8 N |
Elongation at break | 11 % |
Min./max. processing temperature | 10 to 40 °C |
Min./max. temperature resistance | -10 to 70 °C |
Ultraviolet resistance | No |
Moisture resistance | Yes |
Shelf life from production/conditions | 24 Month / dry, lying and dust-free storage area, protected from UV rays, 20°C and 50% humidity |
Last viewed
Hexagonal bolt with thread up to the head
3/8 inch lever reversible ratchet, dust-protected
WÜPOFAST® A2 PZ Particle board screw
Multi-socket wrench 3/8 inch Assortment of 22 pieces
Securing clip for Redoslide HW/HNW sliding door fitting set and wood front panel
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Flat washer without chamfer ISO 7089 A2 stainless steel, 200 HV
Wood screw Hexagon head DIN 571, A2 stainless steel
Pan head screw with H cross recess DIN 7985, A2 stainless steel, plain
Stripping knife AM 280