Universal adhesive tape
Universal adhesive tape
ADHTPE-UNI-BLACK-38MMX50M
Register now and access more than 125,000 products
Marking on floors. Sealing ventilation ducts
Extremely strong rubber adhesive
Excellent adhesion even on uneven, rough and fibrous surfaces
Plastic coating
The tape is impermeable to water and vapour diffusion, is not sensitive to moisture and can be written on
Can be torn off by hand
Tape can be applied quickly and easily
The universal adhesive tape is not resistant to UV so should not be exposed to direct sunlight. The surfaces to be adhered must be dry and free from dust, grease and silicone. To ensure proper adhesion, the tape must be pressed on to the material being bonded with sufficient force
Datasheets(X)
Suitable as a problem-solver for wide range of applications, e.g.:
- Labelling, wrapping and securing cables
- Sealing and labelling cardboard boxes
- Masking sharp-edged objects and abutting carpet edges
- Marking floors
- Sealing joints
- Sealing ventilation ducts
- Masking drill holes, vents and openings
The tape is only suitable for short-term outdoor use
Backing material | Plastic-coated rayon fabric |
Adhesive base | Natural rubber |
Colour | Black |
Width | 38 mm |
Length | 50 m |
Thickness | 0.3 mm |
Dynamic peel strength at 25 mm | 9.8 N |
Elongation at break | 11 % |
Min./max. processing temperature | 10 to 40 °C |
Min./max. temperature resistance | -10 to 70 °C |
Ultraviolet resistance | No |
Moisture resistance | Yes |
Shelf life from production/conditions | 24 Month / dry, lying and dust-free storage area, protected from UV rays, 20°C and 50% humidity |
Last viewed
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Vehicle test tip For measuring leads
Countersunk head screw with recessed head, H DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)
Stretch-fit fleece sweater
Special sanitation wrench
Tyre chalk
34° half-head collated nails AN
Twist drill bit HSS DIN 345 type RN
Rapid windscreen cleaner
Hexagonal bolt with shank DIN 931, steel 8.8, plain