Universal tool set for removal and installation of bushings, bearings and sleeves 40 pieces

• Cost-effective alternative to vehicle-specific tool sets


• All sleeves can be machined and adapted according to the application


• All parts can be individually supplied on purchase


• Includes 20 puller sleeves and pressure sleeves in total, with external diameters ranging from 44 mm to 82 mm. The sleeves, with diameters that increase in 2 mm increments, are also ideal for use in a press


• Sleeves have a step on one side, making them stackable and therefore also suitable for particularly long components


• The set offers 4 different feed shafts (L = 450 mm) for varying types of bore in the component


• Centring bushes with integral pressure bearing for minimal friction when driven mechanically


• For particularly firmly anchored and/or rusted components, the Würth 12-tonne mechadraulics (art. no 1952004080) or the Würth 17-tonne hollow piston cylinder (art. no. 1952004090) can be used

Scope of delivery

• 20x sleeves (internal diameter 34 - 72 mm / external diameter 44 - 82 mm / H = 55 mm)


• 6x sleeve holding plates


• 2x centring bushes with pressure bearings


• 4x spindles (M10x1.5 – M12x1.75 – M14x2.0 – M16x2.0)


• 8x pressure nuts (2 x M10 – 2 x M12 – 2 x M14 – 2 x M16)


• 1 x high-performance spindle grease