Wire rope clamp DIN 741, zinc-plated steel
DIN 741 steel zinc plated
CBLCLMP-DIN741-(A2K)-D3/8-10,0
Register now and access more than 125,000 products
Due to the withdrawal without replacement of the DIN 741 wire rope clamp, it is recommended that wire rope clamp DIN EN 13411-5 is used. From M5 the cable clamp is available as DIN EN 13411-5. For this, see art. no. 052005/0520065/052008/0520010/0520013/0520016/0520019/0520022/0520026/0520030
Datasheets(X)
CAD data (available after login)
Wire rope clamps for cable end connections with minor requirements. For safety requirements, wire rope clamps in accordance with DIN EN 13411-5 must be used.
The clamping jaw must always be attached to the loaded part of the rope. Where a thimble is used in the loop design, the first wire rope clamp should be attached directly to the thimble. The distance between the wire rope clamps should be at least one wire rope clamp t. Whereby t is the width of the clamping jaw.
 | |
Standards | DIN 741 |
Material | Steel |
Surface | Zinc plated |
Suitable for rope diameter (d) | 10.0 mm |
Grip width (t) | 18 mm |
Thread type x nominal diameter (d1) | M8 |
Height (h1) | 42 mm |
Width (b1) | 34 mm |
RoHS-compliant | Yes |
Last viewed
Round head screw with square neck and nut DIN 603 with nut, steel, strength class 4.8, zinc-plated, blue passivated
Trapezoidal mount Without acoustic insulation
PE backfill sealant
Serrated lock washer, externally serrated, shape A DIN 6798 A2 stainless steel. Externally serrated.
Twist drill bit HSS DIN 338 type RN 118°
Multi-standard dungarees
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Manual Whetstone
Combi diamond mortar raking blade
Threaded rod, left-hand thread