Blind rivet, open, with break mandrel and flat head ISO 15983, dome head, A2/A2 stainless steel
ISO 15983 flat head A2 stainless steel/A2
RIV-ISO15983-A2/A2-(6,5-8,5)-3,2X12,0
Register now and access more than 125,000 products
- Standardised "ISO product" with standardised test criteria (see DIN EN ISO 14589)
- Sleeve: A2 stainless steel
- Mandrel: A2 stainless steel
The dimensions and tolerances defined in EN ISO 15983 must be observed.
Datasheets(X)
 | |
Nominal diameter x length (d1 x l1) | 3.2 x 12 mm |
Min./max. grip range | 6.5-8.5 mm |
Head diameter (dk) | 6.7 mm |
Head height (k1) | 1.3 mm |
Min./max. drill hole diameter | 3.3-3.4 mm |
Shear-fracture load | 1900 N |
Tensile fracture load | 2500 N |
Material of sleeve | Stainless steel A2 |
Material of mandrel | Stainless steel A2 |
Surface of the sleeve | Plain |
Surface of the mandrel | Plain |
Drill hole diameter | 3.3 mm |
Standards | ISO 15983 |
RoHS-compliant | Yes |
Head type | Dome head |
Mandrel diameter (dm) | 2.15 mm |
Last viewed
Twist drill bit HSCo DIN 1869 R1 type RN
VARIFIX® sliding nut
Order protector with rip-tape fastening
Rigid aluminium pipe Alu-Steck-WES
Non-woven sanding belt For tube belt sander
Cylindrical pin, hardened DIN 6325, steel, plain
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m
Pipe clamp TIPP® Robust
Hexagonal bolt with shank
Wing screw, square wings Similar to DIN 316, steel 4.8, zinc-plated, blue passivated (A2K), pressed