CERALINE Longlife & Speed lamella flap disc
Lamella flap disc CERALINE
FLPDISC-LL-ST/A2/ALU-CG-CLTH-SR-G80-D125
CERALINE
Register now and access more than 125,000 products
Extremely high and very fast material removal rate with cool grinding
High-performance abrasive grain and active grinding top layer
Very long service life and low contact pressure
High-performance ceramic grain
- Max. circumferential speed 80 m/s
- Recommended rotation speed 7,500 rpm
- Work only with appropriate protective equipment, such as safety goggles, gloves, hearing protection etc.
- Free of iron, chlorine and sulphur (≤ 0.1 %)
Datasheets(X)
- For grinding of edges, deburring, plastering, smoothing and processing weld seams.
- For stainless steel, rust-, acid- and heat-resistant steels (high-alloyed), steel and aluminium
- For freehand grinding with electric and pneumatic angle grinders.
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Grid size | 80 |
Design | Straight |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12250 rpm |
Max. recommended rotation speed | 7500 rpm |
Material of abrasive medium | Ceramic grain |
Last viewed
Hexagon socket screw-in nut with collar
Standard cable tie with plastic latch
Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 300 HV
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Electrical insulating tape
Twist drill bit HSCo DIN 345 Type RN
Screw with flattened half round head and hexagon socket ISO 7380-1 A2-070 stainless steel, plain
Bodywork cleaning agent WNC 50
Vehicle finishing disc
ASSY®plus 4 CSMP universal screw Hardened zinc-plated steel, partial thread, countersunk milling pocket head