CV tie rod head extractor
Tie rod head extractor hexagon
TIE-ROD-END-NIPPER-CV
Register now and access more than 125,000 products
- Teardrop-shaped slot in the outer shell prevents slipping during use
- Suitable for impact screwdriver
- Non-slip, patented impact guide
Datasheets(X)
The tie-rod ends screwed in the tie rods can be separated and twisted off from the corroded thread by simply sliding on the impact socket and actuating using an impact screwdriver.
Depth | 70 mm |
Width across flats | 36 mm |
Max. diameter | 80 mm |
Drive type | Hexagon |
Length | 85 mm |
Product weight (per item) | 1800 g |
Width of mouth | 32.80 mm |
Last viewed
1/4 inch socket wrench insert, metric short
1/2-inch impact socket wrench insert For TX socket screws, long
Clamping jaw for manual riveting tool
Carriage
Floor guide
Flat washer with chamfer ISO 7090, steel, 300 HV, zinc-plated, blue passivated (A2K)
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Divider plate
Twist drill bit HSS DIN 338 type RN 130°
FLEXEN® cold rubber Plus S2 pipe insulation - 2 m