Drilling screw, countersunk head with H cross recess pias® WN 212, zinc-plated blue passivated A3K, H cross recess
pias steel zinc plated countersunk head H
SCR-DBIT-CS-H2-(A3K)-4,8X50
ZEBRA PIAS
Register now and access more than 125,000 products
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Datasheets(X)
CAD data (available after login)
 | |
Other standard | WN 212 |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.8 mm |
Length (l1) | 50 mm |
Head diameter (dk) | 9.5 mm |
Head height (k1) | 3.3 mm |
Internal drive | H2 |
Drill tip length (lp) | 4.5 mm |
Head type | Countersunk head 80 degree |
Thread type | Self-tapping screw thread |
Min. recommended substructure thickness | 1.7 mm |
Max. material thickness to be drilled through (metal) | 4 mm |
RoHS-compliant | Yes |
Last viewed
Oil collection tray for commercial vehicle
Repair cement
Toilet brush In a pot
WÜPOFAST® zinc-plated blue chipboard screw
Sanding sponge
Special die holder
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Adjusting ring DIN 705, shape A and DIN 553 set screw, steel, plain
Collated nails and gas cartridge NG CS-2/3 HD
Façade construction screw Faba® type BZ with hexagon head and sealing washer