EU+ HSCo 90° TiAIN countersink DIN 335 C - CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM

EU+ HSCo 90° TiAIN countersink DIN 335 C - CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM - 1

EU+ HSCo 90° TiAIN countersink DIN 335 C - CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM - 2

EU+ HSCo 90° TiAIN countersink DIN 335 C - CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM - 3

EU+ HSCo 90° TiAIN countersink DIN 335 C

Name: EU+ HSCo 90° TiAIN countersink DIN 335 C
Brand: Würth
SKU: 0694220010

Conical countersink EU HSCo 90° TiAlN DIN 335C
CNTSNK-CONI-EU+-HSCO-90DGR-TIALN-D10,4MM
ZEBRA

Art.-no. 0694220010

EAN 4065233033030

All versions

Similar products

Price for selected packaging unit

EU+ HSCo 90° TiAIN countersink DIN 335 C

Art.-no. 0694220010

Price for selected packaging unit

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: 0800 121 854

The all-rounder with extremely uneven pitch (EU), TiAIN coating and additional relief grinding exclusively available from Würth for perfect countersinking and the highest performance.

Extremely unequal pitch

Optimal surface quality: exact, round, chatter-free countersinking

Maximum running smoothness in all materials

Higher cutting values possible

Exclusive, extra relief grinding

Up to 3x faster than conventional countersinks

Up to 2x more countersinking than conventional countersinks

Significantly less effort when used with hand drills

Deeper countersinking possible

For universal use

Optimal performance in the machining of almost all materials and applications due to special tip geometry and HSCo cutting material

Long service life and high speed

Super-hard coating based on titanium aluminium nitride

3-flat shank

No spinning in the drill chuck: faster, more comfortable working

Optimal power transmission

Protects the drill chuck from damage

Little effort required to loosen and tighten the drill chuck

Product packaging made of 100 % PCR (recycled plastic from household waste), 100 % recyclable and Cradle to Cradle Certified^® Bronze

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents


Material to be processed	Steel, Cast metal, Stainless steel, Titanium, Special alloy, Hard and tough material, Non-ferrous metal, Plastic
Quality	ZEBRA-Premium
Spot-facer diameter (d1)	10.4 mm
Shank diameter (d2)	6 mm
Tip diameter (d3)	2.5 mm
Length (l1)	50 mm
Number of cutting edges (Z)	3 PCS
Standards	DIN 335
Form	C
Cutting material	HSCo
Countersink angle	90 Degree
Surface	TiAlN
Shank style	3-face shank
Service life (points system)	4 of 4 points
Countersinking speed (point system)	4 of 4 points
Countersinking quality (point system)	4 of 4 points
Versatility (points system)	4 of 4 points
Countersinking behaviour (point system)	4 of 4 points
Material of sub-group	General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys (>10% silicon), Aluminium casting alloys (<10% silicon), Magnesium alloys, Copper, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic, Plastics, aramide-fibre reinforced, Plastics, glass/carbon-fibre-reinforced

Legend
v_c = cutting speed [m/min]
f = feed (mm/r)
The suggested cutting values are reference values and must be adapted to the respective conditions.

Conical countersink nominal diameter d1	For countersunk head screws	For countersunk head screws
	DIN EN ISO 10642 (formerly DIN 7991)	DIN EN ISO 2009, 2010, 7046, 7047 (formerly DIN 963,964,965,966)
6.3 mm	M3	M3
8.3 mm	M4	-
10.4 mm	M5	M4, M5
12.4 mm	M6	M6
16.5 mm	M8	M8
20.5 mm	-	M10
25.0 mm	M10, M12	M12
31.0 mm	M16	-

For dia. 16.5 - 31
Material designation	Tensile strength	v_c	f
			Dia. 16.5	Dia. 20.5	Dia. 25	Dia. 31
General structural steels	≤ 500 N/mm²	45	0,170	0,180	0,210	0,240
General structural steels	≤ 1000 N/mm²	42	0,110	0,130	0,150	0,170
Unalloyed heat-treated steels	≤ 700 N/mm²	42	0,170	0,180	0,210	0,240
	≤ 850 N/mm²	42	0,170	0,180	0,210	0,240
	≤ 1000 N/mm²	34	0,110	0,130	0,150	0,170
Alloyed heat-treated steels	≤ 1000 N/mm²	34	0,170	0,180	0,210	0,240
Alloyed heat-treated steels	≤ 1400 N/mm²	13	0,110	0,130	0,150	0,170
Nitriding steels	≤ 1000 N/mm²	34	0,110	0,130	0,150	0,170
Nitriding steels	≤ 1400 N/mm²	13	0,070	0,080	0,090	0,120
Tool steels	≤ 850 N/mm²	34	0,110	0,130	0,150	0,170
Tool steels	≤ 1400 N/mm²	13	0,070	0,080	0,090	0,120
High-speed steels	≤ 1400 N/mm²	13	0,070	0,080	0,090	0,120
Cast iron	≤ 240 HB	21	0,170	0,180	0,210	0,240
Cast iron	≤ 350 HB	18	0,170	0,180	0,210	0,240
Nodular graphite and malleable iron	≤ 240 HB	18	0,170	0,180	0,210	0,240
Nodular graphite and malleable iron	≤ 350 HB	18	0,170	0,180	0,210	0,240
Chilled cast iron	≤ 350 HB	18	0,070	0,080	0,090	0,120
Stainless steels, sulphurated	≤ 900 N/mm²	9	0,110	0,130	0,150	0,170
Stainless steels, austenitic	≤ 1100 N/mm²	9	0,070	0,080	0,090	0,120
Stainless steels, martensitic	≤ 1200 N/mm²	9	0,070	0,080	0,090	0,120
Titanium and titanium alloys	≤ 850 N/mm²	9	0,110	0,130	0,150	0,170
Titanium and titanium alloys	≤ 1400 N/mm²	9	0,070	0,080	0,090	0,120
Special alloys	≤ 1600 N/mm²	7	0,110	0,130	0,150	0,170
Hardox	Hardox 400 - 500, XAR 320, XAR 400	4	0,090	0,110	0,140	0,160
Spring steels	≤ 350 HB	9	0,070	0,080	0,090	0,120
Aluminium and aluminium alloys	≤ 400 N/mm²	77	0,210	0,230	0,260	0,300
Wrought aluminium alloys	≤ 650 N/mm²	55	0,210	0,230	0,260	0,300
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	33	0,170	0,180	0,210	0,240
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	22	0,170	0,180	0,210	0,240
Magnesium alloys	≤ 400 N/mm²	77	0,210	0,230	0,260	0,300
Copper, low-alloy	≤ 500 N/mm²	33	0,210	0,230	0,260	0,300
Brass, short-chipping	≤ 600 N/mm²	72	0,210	0,230	0,260	0,300
Brass, long-chipping	≤ 600 N/mm²	44	0,210	0,230	0,260	0,300
Bronze, short-chipping	≤ 600 N/mm²	72	0,210	0,230	0,260	0,300
Bronze, short-chipping	≤ 850 N/mm²	72	0,210	0,230	0,260	0,300
Bronze, long-chipping	≤ 850 N/mm²	44	0,210	0,230	0,260	0,300
Bronze, long-chipping	≤ 1000 N/mm²	44	0,210	0,230	0,260	0,300
Plastics	≤ 150 N/mm²	33	0,210	0,230	0,260	0,300

Cutting values for conical countersink EU+ HSCo TiAIN 90° DIN 335 C
For dia. 6.3 - 12.4
Material designation	Tensile strength	v_c	f
			Dia. 6.3	Dia. 8.3	Dia. 10.4	Dia. 12.4
General structural steels	≤ 500 N/mm²	45	0,120	0,130	0,135	0,150
General structural steels	≤ 1000 N/mm²	42	0,070	0,080	0,090	0,100
Unalloyed heat-treated steels	≤ 700 N/mm²	42	0,120	0,130	0,140	0,150
	≤ 850 N/mm²	42	0,120	0,130	0,135	0,150
	≤ 1000 N/mm²	34	0,070	0,080	0,090	0,100
Alloyed heat-treated steels	≤ 1000 N/mm²	34	0,120	0,130	0,140	0,150
Alloyed heat-treated steels	≤ 1400 N/mm²	13	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1000 N/mm²	34	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
Tool steels	≤ 850 N/mm²	34	0,070	0,080	0,090	0,100
Tool steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
High-speed steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
Cast iron	≤ 240 HB	21	0,120	0,130	0,140	0,150
Cast iron	≤ 350 HB	18	0,120	0,130	0,140	0,150
Nodular graphite and malleable iron	≤ 240 HB	18	0,120	0,130	0,140	0,150
Nodular graphite and malleable iron	≤ 350 HB	18	0,120	0,130	0,140	0,150
Chilled cast iron	≤ 350 HB	18	0,040	0,050	0,060	0,060
Stainless steels, sulphurated	≤ 900 N/mm²	9	0,068	0,081	0,090	0,100
Stainless steels, austenitic	≤ 1100 N/mm²	9	0,040	0,050	0,060	0,060
Stainless steels, martensitic	≤ 1200 N/mm²	9	0,040	0,050	0,060	0,060
Titanium and titanium alloys	≤ 850 N/mm²	9	0,070	0,080	0,090	0,100
Titanium and titanium alloys	≤ 1400 N/mm²	9	0,040	0,050	0,060	0,060
Special alloys	≤ 1600 N/mm²	7	0,070	0,080	0,090	0,100
Hardox	Hardox 400 - 500, XAR 320, XAR 400	4	0,070	0,080	0,080	0,090
Spring steels	≤ 350 HB	9	0,040	0,050	0,060	0,060
Aluminium and aluminium alloys	≤ 400 N/mm²	77	0,150	0,162	0,170	0,190
Wrought aluminium alloys	≤ 650 N/mm²	55	0,150	0,162	0,170	0,190
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	33	0,120	0,130	0,140	0,150
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	22	0,120	0,130	0,140	0,150
Magnesium alloys	≤ 400 N/mm²	77	0,150	0,160	0,170	0,190
Copper, low-alloy	≤ 500 N/mm²	33	0,150	0,160	0,170	0,190
Brass, short-chipping	≤ 600 N/mm²	72	0,150	0,160	0,170	0,190
Brass, long-chipping	≤ 600 N/mm²	44	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 600 N/mm²	72	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 850 N/mm²	72	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 850 N/mm²	44	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 1000 N/mm²	44	0,150	0,160	0,170	0,190
Plastics	≤ 150 N/mm²	33	0,150	0,160	0,170	0,190

Additional accessory:

Product

Description

Quantity

Price
/PU

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

x 6 pcs

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).