Interior trim clip, type 3
Interior trim clip with closed anchor
INTRMCLIP-HONDA-W.SCR-BLACK-HDD18,0
Register now and access more than 125,000 products
- Pre-mounted on the trim and then inserted into a corresponding hole on the base component.
- Tolerance compensation possible
- Removal of the trim possible
- Also serves as a seal
Datasheets(X)
Fastening of trims to carrier components
Min./max. drill hole diameter | 5.80-6.00 mm |
Min./max. attachment thickness | 2.00-5.90 mm |
Head diameter (A) | 5.90 mm |
Length below head (D) | 14.00 mm |
Colour | Black |
Material | PA 6 - Polyamide |
Suitable for vehicle manufacturer | Honda |
Corresponds to original spare part number | 90688SB0003 |
Installation location | Universal |
Last viewed
Hand tap, taper tap HSS DIN 352
PURlogic® Top single-component gun foam
Single wire seal (SEAL) For uninsulated cable connector
Single-component foam gun Purlogic 100
Vehicle dry abrasive paper roll Arizona® Perfect
Washing brush
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Heavy-duty clamping pin
Deneb – angle bracket
Colour pin nail colour