PinPuller® power pulling electrode
Pulling electrode PinPuller Power bent
PULLELTRD-BT-F.PINPULLER-POWER-27FOLD
PIN PULLER
Register now and access more than 125,000 products
Broad range of applications
- Heavy slide hammer
- Pulling attachment for straightening jig
- Pulling bar
Suitable for universal use
Unique, curved pin electrode for reforming wheel arches
- Reflects trend towards wide and flat wheel arch surfaces
- The electrode radius adapts perfectly to 95% of all wheel arches
Optimum power distribution with numerous electrodes in 2 rows at very short intervals
No bump formation, no unnecessary material weakening
In contrast to wiggle wire, pin electrodes can be welded on more than 1000 times
Effective and economical
Thanks to the insulated bearing of each electrode, only minimal welding power is required
Low heat input into sheet metal
Individual electrodes are quick to weld on and easy to remove by twisting
Saves valuable working time
Datasheets(X)
Design | Curved |
Number of rows | 2 PCS |
Number of electrodes | 27 PCS |
Product weight (per item) | 319 g |
Last viewed
Connection sleeve with bolt For system connector SV 20 E
Slotted round head screw W-0231, steel 4.8, zinc-plated, with slot
Fuse holder For flat blade fuses with covers
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Hexagonal bolt with shank, SB FITTINGS, DIN EN 15048-1 DIN 7990, steel 4.6, hot-dip galvanised (hdg)
Rivet nut with partial hexagonal shank and small countersunk head
Vehicle interior protection set 5 pieces
Allen key set, TX 8 pieces
System assortment 8.4.1, screwdriver 18 pieces
Repair set for 1/2 inch multi-angle ratchet 4 pieces