Screwdriver PH short with round shank
Screwdriver PH round blade short
SCRDRIV-PH-KNIRPS-PH1X25
ZEBRA
Register now and access more than 125,000 products
Small, but with many strengths
- For hard-to-reach and narrow areas due to the extra short shank
- Robust round shank, which has been brushed chrome-plated to protect against corrosion
- Quick identification of the right size using the Würth colour code on the shank
- Black point tip for the best possible fit in the screw
- Tip finished according to the DIN 5260-PH and ISO 8764-PH standards for PH screwdrivers
- Complies with the DIN 5262 and SMS SS 2831 standards
Fits comfortably in your hand
- Fatigue-free working with the 2C handle with hard core and soft, non-slip surface
- Fast-turning zone and hard material in the lower part of the handle enable quick turning using the index finger and thumb once the screw is loosened
- Quick and easy identification with the shank symbol and size printed on the handle
Datasheets(X)
Tip size | PH1 |
Blade length (A) | 25 mm |
Handle length (B) | 62 mm |
Handle width (C) | 31 mm |
Last viewed
Lock washer DIN 7980, A2 stainless steel, plain, for cylinder head screw
Wire cable barrel terminal with right-handed thread
Threaded pin ISO 4027, steel, 45H, plain
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Slotted countersunk head screw DIN 963, brass, plain
Slotted flat-head screws with small head DIN 920, steel 5.8, zinc-plated, blue passivated (A2K)
1/2 inch extension
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Twist drill bit HSCo DIN 345 Type RN
Press tool holder For transmission jacks