Separator
Separator tool
SEPRTL-SPNW155MM
Register now and access more than 125,000 products
- This separator is used if puller hooks cannot reliably grip the part being extracted as it is seated too closely. The separating blades are mounted between the parts and pressed against each other. The wedge shape of the separating blade separates the assembly.
- The separator can also be used to remove thin parts, as the pull-off force acts on a large area. Prevents undesirable deformations and damage. The separating blades are mounted with the flat surface under the part to be removed.
- Drop-forged and hardened separating blades
- High-strength clamping screws
Datasheets(X)
 | |
Min./max. internal clamping width (A) | 30-155 mm |
Width of clamping jaw (B) | 215 mm |
Spindle length (C) | 310 mm |
Min./max. hole distance (E) | 137-262 mm |
Material of separating blade | Vanadium steel |
Surface of the separating blade | Zinc plated |
Thread dimension | M18 x 1.5 |
Last viewed
Standard drill chuck with SDS-plus drive arbor
Cylindrical pin with female thread, unhardened DIN 7979, shape C, unhardened
WN type RN facade construction drill bit
Square weld nuts DIN 928, steel, plain
Compression cable lug DIN 46235
Threaded rod DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated (A2K)
1/4 inch socket wrenches Assortment of 20 pieces
O-ring, metric
Wood screw Hexagon head DIN 571, A2 stainless steel
W-VIZ-A DYNAMIC anchor rod, zinc-plated steel for W-VIZ/S dynamic injection systems (concrete, fatigue loading)